Color Description
Nothing gets past this loud safety orange.
PETG (Glycol-modified Polyethylene Terephthalate)
PETG is an excellent alternative to ABS and PLA. It offers the strength and durability of ABS, and the superb layer adhesion and ease of use of PLA. PETG also provides excellent impact and chemical resistance. Unlike ABS, PETG does not require a heated bed, barely warps, and does not produce any odors or fumes. PETG is not biodegradable but is recyclable. It is best used to create mechanical parts. Virgin PETG is FDA-Compliant. However, the pigments used to develop PETG prevent it from being FDA-compliant.
Advantages
- Environmentally safe and recyclable
- Odorless
- Excellent layer adhesion
- High strength and heat resistance
- Reduced shrinkage
- Chemical resistance to both acidic and alkali compounds
- Exceptionally durable
- More flexible than ABS
- Minimal post-processing
Suggested settings:
| Print temp (°C) |
200 ~ 240 |
| Bed temp (°C) |
75 ~ 85 |
| Speed (mm/s) |
60 - 100 |
Other details
| Diameter Tolerance |
±0.03mm |
| Net Weight (kg) |
1 |
| Gross Weight (kg) |
1.5 |
| Full Length (1.75 mm) |
328 M |
Our print settings:
| Printer |
UltiBots D300VS+ & UltiBots D300VS |
| Bed |
Glass |
| Slicer |
KISSlicer |
| 1st Layer Print Temp |
225°C |
| Print Temp |
220°C |
| Bed Temp (1st Layer) |
85°C |
| Bed Temp |
80°C |
