null

Carbon Fiber (CF) PC+ in 1KG rolls are back in stock! Click here to go to the product page.

Also Available From:


SnoLabs

Alchemist Gold-1.75-PLA+ (Silk)

MSRP:
Was:
Now: $29.99
(You save )
  • mylar bag standing up.
  • Spoolin Around Microfiber towel close up.
  • Spoolin Around Microfiber towel close up.

Out of stock, Check back soon!

Ships Next Business Day!

Description

Color Description

Here we envisioned the perfect silky, lustrous, warm yellow-gold. A color that comes to mind when someone tries to fool a king with fake jewelry.

PLA+ (Polylactic Acid)

PLA is one of the most popular 3D printing materials because it prints at low temperatures, doesn't require a heated bed, and doesn't warp. Due to its low printing temperature, it's usable with 3D printers and 3D printing pens! PLA is a biodegradable material made from renewable natural resources such as corn-starch.

Please note this has a silk additive; as such, I would treat it like another material.

We highly recommend going through your normal tuning routine as you would with any new material.

It's typical for the material to swell a little while idle at extrusion temperature; however, it returns to normal once you're printing. 

There may be a slight increase in retraction from your normal PLA profile.

Tip: You can play with the extrusion temperature and speed for varying levels of sheen.

What's the difference between PLA and PLA+?

PLA+ is made of the same great PLA but has different additives to toughen your prints, so they're even easier to print and more durable!

Advantages

  • Easy to print reliably.
  • Low warping as compared to other materials.
  • A heated bed is not required! We recommend using blue tape if you do not have a heated bed to prevent warping.
  • Eco-friendly! 
  • Nontoxic, unlike ABS.

Suggested settings:

Print temp (°C) ~215+/-5
Bed temp (°C) 0 ~ 65
Speed (mm/s) 20-50

 

Other details

Diameter Tolerance ±0.03mm
Net Weight (kg) 1
Gross Weight (kg) 1.5
Full Length (1.75 mm) 333 M

Our print settings:

Printer UltiBots D300VS+ & UltiBots D300VS
Bed Glass
Slicer KISSlicer
1st Layer Print Temp 220°C
Print Temp 220°C
Bed Temp (1st Layer) 55°C
Bed Temp 50°C

Related Products