The Volcano HotEnd is E3D’s answer to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables its users to print bigger and stronger parts faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must have.
Volcano: Print Faster, Stronger, Bigger
Much like the V6, Volcano is fully compatible with the E3D ecosystem and offers an assortment of different nozzle sizes. Users can print thick, strong layers with a 1.2mm nozzle or for higher precision prints opt for a 0.4mm nozzle.
Thanks to its larger melt zone, Volcano enables users to print higher and wider tracks which results in dramatically reduced print times.
In addition to reduced print time, the thick tracks printed by Volcano have greater interlayer adhesion and bond to one another with greatly improved strength. Parts printed are extremely strong, less brittle and feel much more sturdy than standard prints.
The size of printers is increasing and we now see machines that have the ability to create huge objects that push the limits of what we can print. However, printing these huge parts is incredibly slow and can take days which is simply impractical in many cases. The Volcano makes printing these objects much more efficient and can reduce print times by more than half.
Check out E3D's Blog for more information on Volcano.
1x V6 Universal Fixing Kit.
1x Thermistor Cartidge.
1x 30W Heater Cartridge.
1x Extension wire for thermistor.
1x Volcano Heater Block.
1x 0.60 mm Brass Volcano Nozzle
1x 0.80 mm Brass Volcano Nozzle
1x 1.00 mm Brass Volcano Nozzle
1x 1.20 mm Brass Volcano Nozzle
2x M3x10mm Socket Dome Screw for securing heater cartidge.
1x M3x3 Socket Dome Screw.
1x M3 Washer for securing heater cartridge.
4x Plastfast30 3.0 x 16 Screws for securing fan.
2x M3 Grub screws for securing thermistor.
1x 1.5 mm Hex wrench.
1x 2.0 mm Hex wrench.