All the best V6 parts, carefully curated to make the V6 Gold HotEnd. Built for outstanding performance with all filaments, optimised for high-temperature and abrasive 3D printing. 1.75mm only.
- Gold Heat Sink
We’ve blinged up the heat sink with gold anodizing so that everyone can see from 10 yards away that you are a fancy individual who will only accept the best of the best in HotEnd technology.
- Copper Alloy Heater Block
We’ve switched the aluminum heater block for a plated copper-alloy block, again increasing heat transfer to the filament and reducing the chance of filament goo sticking to it. This reduces the need for a sock so that you can show off the shiny engraving.
The standard brass nozzle has been swapped in favor of hardened steel. Where brass nozzles can be worn down and even ruined by abrasive materials, hardened steel will last a lifetime. If you print with carbon fiber, filled filaments, or even glow in the dark filament then these nozzles are a must.
- Heater Cartridge
We’ve swapped standard heaters for our upcoming high precision, quick release heater cartridges. Spot-on physical dimensions and electrical specifications guarantee perfect performance. Quick-release also makes tinkering with your HotEnd a doddle.
- Fan Duct
A clear, molded plastic fan duct shows off the beautiful golden heatsink to its very best.
- PTFE Guide
We’ve upgraded the standard PTFE guide to High Tolerance Capricorn PTFE Tubing. This new Bowden tubing has a tight diameter and much-reduced friction, giving smoother, more accurate extrusion.
1x Special Edition Gold Anodized Heatsink.
1x 1.75mm Stainless Steel Heat Break.
1x 1.75mm x 0.4mm Hardened Steel Nozzle.
1x Plated Copper Heater Block.
1x Thermistor Cartridge.
1x 30x30x10mm 24V Fan.
2x Connector Cable.
1x 30W 24V High Precision Heater Cartidge.
1x Fiberglass Insulated Heater Connetor Cable.
1x Fan Duct.
1x Silicone Sock.
1x Thermal Compound Sachet.
1x Fixings Kit.
800mm High Tolerance Capricorn PTFE Tubing.