The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Carbon Fiber-1.75-PETG

(1 review) Write a Review
Ships next business day!
A 1KG spool of SnoLabs Carbon FIber PETG (1.75mm)
Orders placed by 3pm (EST) are shipped same day!

Please note:

The carbon fiber powder is hygroscopic, meaning it will absorb moisture if left in a humid environment. If it does absorb moisture, you will notice weird artifacts or difficulty printing. To fix this, we recommend dehydrating the roll in a food dehydrator or via an oven before printing.


PETG (Glycol-modified Polyethylene Terephthalate)

PETG is an excellent alternative to ABS and PLA. It offers the strength and durability of ABS, and the superb layer adhesion and ease of use of PLA. PETG also provides excellent impact and chemical resistance. Unlike ABS, PETG does not require a heated bed, barely warps, and does not produce any odors or fumes. PETG is not biodegradable but is recyclable. It is best used to create mechanical parts. Virgin PETG is FDA-Compliant. However, the pigments used to develop PETG prevent it from being FDA-compliant.


  • This filament is filled with carbon fiber to make your prints stronger! You get the advantages of easy printing of PETG and the added strength of carbon fiber!
  • Environmentally safe and recyclable
  • Odorless
  • Excellent layer adhesion
  • High strength and heat resistance
  • Reduced shrinkage
  • Chemical resistance to both acidic and alkali compounds
  • Exceptionally durable
  • More flexible than ABS
  • Minimal post-processing

Suggested settings:

Print temp (°C) 200 ~ 240
Bed temp (°C) 75 ~ 85
Speed (mm/s) 60 - 100

Other details

Diameter Tolerance ±0.03mm
Net Weight (kg) 1
Gross Weight (kg) 1.5
Full Length (1.75 mm) 328 M

Our print settings:

Printer UltiBots D300VS+ & UltiBots D300VS
Bed Glass
Slicer KISSlicer
1st Layer Print Temp 240°C
Print Temp 235°C
Bed Temp (1st Layer) 85°C
Bed Temp 80°C

1 Review Hide Reviews Show Reviews

  • 5
    Actually like carbon

    Posted by William Evans on May 22nd 2018

    The texture and feel is the closest to actual carbon that I've tried. Great matte look, prints great and feels strong